By calibrating and aligning the IF (intermediate frequency) amplifiers we are optimizing SOUND, SENSITIVITY and SELECTIVITY.
We ask that you listen and compare any of our tuners against the competitors' similarly priced units and decide.
Features & Benefits
Tunable five stage ANALOG front end (the more stages, the better); provides station separation without affecting stereo separation; Magnum Dynalab's in-house design
Certified Amperex Bugle Boy 6922 tubes in the amplification stage - proven leader among tube manufacturers to provide the highest listening experience from the tube topography
Balanced output -- fully complimentary circuit insures a perfectly balanced signal
BW 1 - Ultra wide IF Band Width setting; this setting produces the best SOUND where adjacent channel interference is not a factor
BW 2 - Narrow IF Band Width setting; this setting produces the best sound where adjacent channel interference is a factor
Dual AGC (automatic gain control) stage -- eliminates the need for a local and distant switch
Auto Blend RF Circuit -- Automatically monitors and adjusts stereo separation to maximize "stereo quieting", insuring the quietest stereo signal as possible. Greatly improving your listening quality.
Shielded torroidal transformer -- reduces the noise floor of the tuner
Ultra linear capacitors in the power supply circuit -- improve the frequency response
Precision voltage stabilizers in the power supply circuit -- ensure precise tuning
Kimber Hyper-Pure copper wiring in the audio path -- provides a clean, uncolored path for the signal
Burr Brown op amps with Black Gate capacitors -- proven performance from industry leading suppliers with zero degradation over the long haul
Precision tunable matched IF (intermediate frequency) amplifiers -- ensures consistent specifications for adjacent channel separation, alternate channel separation and low distortion
Dual antenna inputs -- flexibility in choosing antennas
Defeatable mute -- eliminates any interstation noise while tuning
Aluminum chassis -- provides total shielding
Analog meters -- easy to read center tune, multipath and signal strength measurements
WBT unbalanced (RCA) output connectors -- low tolerance connector made of highly ductile "OFC" copper, 24 carat gold plated ensures a solid contact for interconnects
.093 thick printed circuit board - minimizes any residual vibration in the chassis
Gold plated NeutriK Balanced connectors -- exact dimensions to ensure maximum conductivity
Fully shielded RF section-eliminates any interference from stray signals
20,000 uf. Filtration
[Á¦Ç°»ç¾ç]
50 Db quieting : stereo 25.0 dBf
capture ratio : > 1.5 dB
image rejection : 110.0 dB
signal to noise ratio : 80.0 dB
alternate channel - wide : 70.0 dB
alternate channel - narrow : 80.0 dB
adjacent channel - wide : 3.0 dB
adjacent channel - narrow : 35.0 dB
THD - mono : 0.10%
THD - stereo : 0.10%
stereo separation : 50.0 dB
AM suppression : 70.0 dB
SCA rejection : 80.0 dB
I.F. Rejection : 80.0 dB
19 Khz and 38 Khz component rejection : 75.0 dB
audio frequency response (+/_ 1dB) : 15 Hz - 17 Khz
balanced audio output (600 ohms) : 2.2 V
line audio output (RCA) : 1.0 V
line power : 20/220/230/240 Vac
dimensions - (cm HWD) : 11.43 x 48.3 x 38.1
weight (lbs./Kg) : 16/7.1
power consumption (typ/max) : 50w/100w