|
|
Alex Sandulescu, Product Manager, Arcam
Continuous power output (20Hz—20kHz at 0.5% THD), per channel |
|
Both channels, 8¥Ø, 20Hz—20kHz |
80W |
Single channel, 4¥Ø, at 1kHz |
175W |
Harmonic distortion, 80% power, 8¥Ø at 1kHz |
0.003% |
Inputs |
|
Nominal sensitivity |
1V |
Input impedance |
10k¥Ø |
Maximum input |
4.6Vrms |
Frequency response |
20Hz - 20kHz ¡¾ 0.2dB |
Signal/noise ratio (Awtd) 50W, ref. 1V input |
105dB |
Phono (MM) cartridge: |
Input sensitivity at 1kHz: 5mV Input impedance: 47k¥Ø + 100pF Frequency response (ref. RIAA curve): 20Hz - 20kHz ¡¾ 1dB Signal/Noise ratio (Awtd) 50W, ref. 5mV input: 80dB Overload margin, ref. 5mV at 1kHz: 23dB |
Preamplifier output |
|
Nominal output level |
735mV |
Output impedance |
230¥Ø |
Headphone output |
|
Maximum output level into 600¥Ø |
5V |
Output impedance |
1¥Ø |
Load range |
16¥Ø - 2k¥Ø |
Accessory power output |
|
2.1mm DC connector |
6V, 500mA |
General |
|
Mains voltage |
110-120V or 220-240V |
Power consumption (maximum) |
500W |
Dimensions W x D x H (including feet) |
433 x 275 x 85mm |
Weight (net) |
9.2kg |
Weight (packed) |
10.7kg |
Supplied accessories |
Mains lead CR902 remote control 2 x AAA batteries Accessory power cable | Technical Specifications
- Integrated stereo amplifier
- 80W Class G amplification
- On board PSU for rSeries products
- CR902 system remote control
- Phono input configurable for line/MM
- Large ergonomically designed aluminium knob
- Low power 0.5W standby
|
|
|
|